Speaker Test — Check Your Phone Speaker

Speaker Test — Check Your Phone Speaker

Play a tone, listen, and find out in under two minutes whether your speaker is fine, blocked, wet, or damaged. No app to install, no sign-up, no payment — everything runs in your browser.

Before you start: turn your volume up to about half, take off headphones and Bluetooth earbuds, and remove the phone case if the speaker sounds muffled. Start quiet — loud high-pitched tones can be uncomfortable.

1. Frequency Test — 20 Hz to 20 kHz

440 Hz

Mid tone — most people hear this clearly

Hz

The slider is logarithmic, like your hearing: small moves at the low end, bigger jumps at the high end. That is why 20–200 Hz takes up as much of the slider as 2,000–20,000 Hz.

2. Left / Right Channel Test

Tap a side. The tone plays from that side only. On most phones both speakers are in one place, so the sound will seem to come from the bottom — what matters is whether one side is silent, quieter, or distorted compared with the other.

◀ LEFTleft channel
RIGHT ▶right channel

3. Volume Test — Quiet to Loud

Five short tones, each louder than the last, at 440 Hz. Tap “I heard it” the first time you hear a tone clearly. That tells you the lowest volume your speaker still works at.

10%
30%
50%
75%
100%

If you only hear the last one or two tones, your speaker may be partly blocked or the volume is capped somewhere — check the volume slider, Do Not Disturb, and any app-specific volume first.

4. Step-by-Step Diagnostic

Answer honestly after each tone. There are no wrong answers — each one points to a different fix.

Step 1 of 5

Can you hear this tone at all?

A clear mid tone (440 Hz) from both channels. This is the basic check: if nothing plays here, the problem is not dust or water — it is sound output itself.

What Each Test Tells You

TestIf it sounds normalIf it sounds wrong
Frequency (165 Hz)Low tones play cleanly.Buzzing, rattling or silence can mean water or dust in the speaker grille.
Frequency (10 kHz)High tones are thin but audible.No high tone at all, while low tones work, can mean a damaged or ageing speaker.
Left / rightBoth sides sound the same.One side silent or much quieter points to that channel or speaker.
Volume stepsYou hear the tone by 30–50%.Only the loudest steps are audible — check volume limits, then suspect a blockage.
SweepOne smooth tone rising in pitch.Crackles, drop-outs or rattles at one pitch point to dirt or water at that frequency.

What This Tool Can and Cannot Fix

It can help with

Finding out whether the speaker works at all, whether one side is dead, whether low or high sounds are missing, and whether water or dust is the likely cause — so you try the right fix first instead of guessing.

It cannot fix

A physically torn speaker, a loose internal connection, water damage to the phone’s board, or a software bug. If the diagnostic says “no sound at all” after you have checked volume, silent mode and a restart, that is a repair or service-centre job, not a sound you can play away. The 165 Hz water-eject tone on our cleaner can push water out of the grille — it cannot repair damage water has already done inside.

Related Guides

Remove water from your phone speaker | Phone speaker not working | Fix a dusty phone speaker | No sound on my phone

Free tool — no download, no account. Your audio never leaves your phone: every tone is generated in your browser.